RM3090E _59 Vehicle Exterior _008792 WINDOW / GLASS _0050075 POWER WINDOW MASTER SWITCH G

WINDOW / GLASS  POWER WINDOW MASTER SWITCH  INSPECTION  


PROCEDURE

Hide 85720C 1.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for LHD)

a.
B319268
1.25,1.625 1.25,0.969 1.25,0.969 0.771,0.969 false 1.573,1.625 1.573,0.719 1.573,0.719 1.104,0.719 false 1.719,1.625 1.719,0.333 1.719,0.333 1.479,0.333 false 1.865,1.625 1.865,0.573 1.865,0.573 2.094,0.573 false 2.333,1.625 2.333,0.938 2.333,0.938 2.542,0.938 false 1.094,1.969 1.094,2.521 1.094,2.521 0.76,2.521 false 1.427,1.969 1.427,2.823 1.427,2.823 1.073,2.823 false 1.594,1.969 1.594,3.104 1.594,3.104 1.354,3.104 false 1.885,1.969 1.885,2.917 1.885,2.917 2.188,2.917 false 2.042,1.969 2.042,2.583 2.042,2.583 2.521,2.583 false 2.354,1.969 2.354,2.354 2.354,2.354 2.844,2.354 false 1.333,0.24 1.458,0.427 0.125,0.188 10 D 0.063,0 0.323,0.188 0.26,0.188 10 *a 0.635,0.896 0.76,1.083 0.125,0.188 10 U 2.135,0.479 2.26,0.667 0.125,0.188 10 A 2.563,0.854 2.688,1.042 0.125,0.188 10 E 0.969,0.635 1.094,0.823 0.125,0.188 10 B 0.604,2.438 0.729,2.625 0.125,0.188 10 D 1.198,3.01 1.323,3.198 0.125,0.188 10 D 2.229,2.823 2.354,3.01 0.125,0.188 10 D 0.917,2.74 1.042,2.927 0.125,0.188 10 U 2.875,2.26 3,2.448 0.125,0.188 10 U 2.542,2.49 2.667,2.677 0.125,0.188 10 U
D
*a
U
A
E
B
D
D
D
U
U
U
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)


w/ Jam Protection Function:

i.

Check the switch function.


ii.

Check that the window lock switch is off.


iii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
4 (A) - 1 (E) Auto UP (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
8 (U) - 1 (E) Auto UP (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
8 (U) - 1 (E) Manual UP (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
4 (A) - 1 (E) Auto DOWN (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
5 (D) - 1 (E) Auto DOWN (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
5 (D) - 1 (E) Manual DOWN (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
16 (U) - 1 (E) Manual UP (for front passenger door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 16 (U) Manual UP (for front passenger door) Below 1 Ω
Not operated 10 kΩ or higher
15 (D) - 1 (E) Manual DOWN (for front passenger door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 15 (D) Manual DOWN (for front passenger door) Below 1 Ω
Not operated 10 kΩ or higher
12 (U) - 1 (E) Manual UP (for rear LH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 12 (U) Manual UP (for rear LH door) Below 1 Ω
Not operated 10 kΩ or higher
13 (D) - 1 (E) Manual DOWN (for rear LH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 13 (D) Manual DOWN (for rear LH door) Below 1 Ω
Not operated 10 kΩ or higher
10 (U) - 1 (E) Manual UP (for rear RH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 10 (U) Manual UP (for rear RH door) Below 1 Ω
Not operated 10 kΩ or higher
18 (D) - 1 (E) Manual DOWN (for rear RH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 18 (D) Manual DOWN (for rear RH door) Below 1 Ω
Not operated 10 kΩ or higher


If the result is not as specified, replace the power window regulator master switch assembly.



b.
B164359
0.203,0.086 0.392,0.271 0.189,0.185 10 *a 1.669,2.638 1.976,2.824 0.307,0.185 10 LED 2.601,2.638 2.734,2.824 0.133,0.185 10 E 2.389,1.719 2.655,2.638 false 2.054,1.73 1.83,2.638 false
*a
LED
E
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)


Check that the LED illuminates.

i.

Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 3 (LED)
Battery negative (-) → 1 (E) 		LED illuminates


If the result is not as specified, replace the power window regulator master switch assembly.



c.
B319268
1.573,1.625 1.573,0.719 1.573,0.719 1.104,0.719 false 1.844,1.625 1.844,0.333 1.844,0.333 1.604,0.333 false 2.021,1.625 2.021,0.573 2.021,0.573 2.25,0.573 false 2.333,1.625 2.333,0.938 2.333,0.938 2.542,0.938 false 1.094,1.969 1.094,2.521 1.094,2.521 0.76,2.521 false 1.427,1.969 1.427,2.823 1.427,2.823 1.073,2.823 false 1.594,1.969 1.594,3.104 1.594,3.104 1.354,3.104 false 1.885,1.969 1.885,2.917 1.885,2.917 2.188,2.917 false 2.042,1.969 2.042,2.583 2.042,2.583 2.521,2.583 false 2.354,1.969 2.354,2.354 2.354,2.354 2.844,2.354 false 1.479,0.26 1.604,0.448 0.125,0.188 10 D 0.063,0 0.323,0.188 0.26,0.188 10 *a 2.281,0.5 2.406,0.688 0.125,0.188 10 U 2.563,0.854 2.688,1.042 0.125,0.188 10 E 0.969,0.635 1.094,0.823 0.125,0.188 10 B 0.604,2.438 0.729,2.625 0.125,0.188 10 D 1.198,3.01 1.323,3.198 0.125,0.188 10 D 2.229,2.823 2.354,3.01 0.125,0.188 10 D 0.917,2.74 1.042,2.927 0.125,0.188 10 U 2.875,2.26 3,2.448 0.125,0.188 10 U 2.542,2.49 2.667,2.677 0.125,0.188 10 U
D
*a
U
E
B
D
D
D
U
U
U
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)


w/o Jam Protection Function:

i.

Check the switch function.


ii.

Check that the window lock switch is off.


iii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
3 (U) - 1 (E) Manual UP (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
4 (D) - 1 (E) Manual DOWN (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
16 (U) - 1 (E) Manual UP (for front passenger door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 16 (U) Manual UP (for front passenger door) Below 1 Ω
Not operated 10 kΩ or higher
15 (D) - 1 (E) Manual DOWN (for front passenger door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 15 (D) Manual DOWN (for front passenger door) Below 1 Ω
Not operated 10 kΩ or higher
12 (U) - 1 (E) Manual UP (for rear LH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 12 (U) Manual UP (for rear LH door) Below 1 Ω
Not operated 10 kΩ or higher
13 (D) - 1 (E) Manual DOWN (for rear LH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 13 (D) Manual DOWN (for rear LH door) Below 1 Ω
Not operated 10 kΩ or higher
10 (U) - 1 (E) Manual UP (for rear RH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 10 (U) Manual UP (for rear RH door) Below 1 Ω
Not operated 10 kΩ or higher
18 (D) - 1 (E) Manual DOWN (for rear RH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 18 (D) Manual DOWN (for rear RH door) Below 1 Ω
Not operated 10 kΩ or higher


If the result is not as specified, replace the power window regulator master switch assembly.



Hide 85720C 2.INSPECT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH (for RHD)

a.
B319268
1.083,1.625 1.083,0.969 1.083,0.969 0.604,0.969 false 1.573,1.625 1.573,0.719 1.573,0.719 1.104,0.719 false 1.719,1.656 1.719,0.365 1.719,0.365 1.479,0.365 false 1.865,1.625 1.865,0.573 1.865,0.573 2.094,0.573 false 2.333,1.625 2.333,0.938 2.333,0.938 2.542,0.938 false 1.094,2.052 1.094,2.469 1.094,2.469 0.76,2.469 false 1.406,2.063 1.406,2.802 1.406,2.802 1.052,2.802 false 1.573,2.063 1.573,3.063 1.573,3.063 1.323,3.063 false 1.885,2.031 1.885,2.917 1.885,2.917 2.188,2.917 false 2.042,2.052 2.042,2.583 2.042,2.583 2.521,2.583 false 2.344,2.042 2.354,2.354 2.354,2.354 2.844,2.354 false 1.344,0.292 1.469,0.479 0.125,0.188 10 D 0.063,0 0.323,0.188 0.26,0.188 10 *a 2.583,0.865 2.708,1.052 0.125,0.188 10 U 2.135,0.49 2.26,0.677 0.125,0.188 10 A 0.49,0.896 0.615,1.083 0.125,0.188 10 E 0.969,0.646 1.094,0.833 0.125,0.188 10 B 2.885,2.281 3.01,2.469 0.125,0.188 10 D 1.198,2.99 1.323,3.177 0.125,0.188 10 D 2.229,2.844 2.354,3.031 0.125,0.188 10 D 0.917,2.729 1.042,2.917 0.125,0.188 10 U 0.635,2.406 0.76,2.594 0.125,0.188 10 U 2.542,2.5 2.667,2.688 0.125,0.188 10 U
D
*a
U
A
E
B
D
D
D
U
U
U
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)


Check the switch function.

i.

Check that the window lock switch is off.


ii.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
4 (A) - 9 (E) Auto UP (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
1 (U) - 9 (E) Auto UP (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
1 (U) - 9 (E) Manual UP (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
4 (A) - 9 (E) Auto DOWN (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
5 (D) - 9 (E) Auto DOWN (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
5 (D) - 9 (E) Manual DOWN (for driver door) Below 1 Ω
Not operated 10 kΩ or higher
12 (U) - 9 (E) Manual UP (for front passenger door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 12 (U) Manual UP (for front passenger door) Below 1 Ω
Not operated 10 kΩ or higher
13 (D) - 9 (E) Manual DOWN (for front passenger door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 13 (D) Manual DOWN (for front passenger door) Below 1 Ω
Not operated 10 kΩ or higher
18 (U) - 9 (E) Manual UP (for rear LH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 18 (U) Manual UP (for rear LH door) Below 1 Ω
Not operated 10 kΩ or higher
10 (D) - 9 (E) Manual DOWN (for rear LH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 10 (D) Manual DOWN (for rear LH door) Below 1 Ω
Not operated 10 kΩ or higher
16 (U) - 9 (E) Manual UP (for rear RH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 16 (U) Manual UP (for rear RH door) Below 1 Ω
Not operated 10 kΩ or higher
15 (D) - 9 (E) Manual DOWN (for rear RH door) 10 kΩ or higher
Not operated Below 1 Ω
6 (B) - 15 (D) Manual DOWN (for rear RH door) Below 1 Ω
Not operated 10 kΩ or higher


If the result is not as specified, replace the power window regulator master switch assembly.



b.
B164359
2.021,1.833 2.021,2.5 false 1.083,1.813 1.083,2.5 false 1.927,2.531 2.385,2.729 0.458,0.198 10 LED 1.063,2.521 1.521,2.719 0.458,0.198 10 E
LED
E
*a Component without harness connected
(Power Window Regulator Master Switch Assembly)


Check that the LED illuminates.

i.

Apply battery voltage to the power window regulator master switch assembly and check that the LED illuminates.

OK:
Measurement Condition Specified Condition
Battery positive (+) → 3 (LED)
Battery negative (-) → 9 (E) 		LED illuminates


If the result is not as specified, replace the power window regulator master switch assembly.